Quick Transfer - Comdial DSU II System Manual

DSU II Digital Telephone System

3.7.31 Quick Transfer

Description: The Quick Transfer feature allows users to transfer line calls without having to press the
TRANSFER/CONFERENCE key. When this feature is enabled, users can transfer calls
by pressing the appropriate DSS key (or INTERCOM + extension number) and then
hanging up. This feature is disabled at default.
To Program: 1. Dial 53 for station features.
2. Dial 43 for quick transfer.
3. Select station ports (LED On = Selected):
4. Dial
To change setting, repeat procedure and make different selection.
—Station 10–57: Dial 10–57 or press C10–C57.
for next station feature
—OR—
dial for configuration mode.
"STATION FEATURES"
"QUICK TRANSFER"
TAB003 – page 7
Programming The DSU II System 3 – 76a
IMI89–132