Station Features - Comdial DSU II System Manual

DSU II Digital Telephone System
3.7

Station Features

Station programming means that you are programming the functions for one particular station, or port.
While it isn't necessary, it is a good idea to do station programming after you have done system and line
programming. You should make a record in Chapter 4 of all programming decisions that you make—it
will help you keep track of what you have done and will help you troubleshoot any problem that might
arise later.
NOTE:
A lighted LED next to the programming button for the selection indicates the current
configuration. When a single button provides a toggle (on/off) action, the lighted LED
indicates the active feature.
The first step in any programming sequence is to enter the base level. Once in this mode, you can dial the
feature code for any desired configuration. Enter the base level with the following procedure:
press INTERCOM then dial # 7 4 6 . The last step is to press the SPEAKER button to end the
programming procedure and return the system to normal operation.
Make station port selection by dialing a selection number on the keypad or pressing the console button
according the following reference table.
10–57
Station Port Codes
Station Ports Keypad Buttons
10–57
Console Buttons
C10–57
Programming The DSU II System 3 – 45
IMI66–132