Fax Detection With Automatic Transfer - Comdial DX-80 Installation & Maintenance Manual

Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

FAX Detection with Automatic Transfer

The DX-80 system has a standard FAX Tone Detection capability on the fourth (4th) port of each CO Line board.
(That is, CO Line ports 4, 8, 12 and 16 have the circuitry required to detect "CNG" FAX tone.) When the system is
programmed to receive a facsimile transmission on one of these CO line circuits, it automatically answers the ringing
line and waits for FAX tone. If the FAX CNG tone is detected the call is connected to the specified (programmed)
facsimile extension.
Related Features
Single Line Telephone/Analog Device Support
Related Programming
Call Handling - Fax Ring Time
CO Line Application - Fax Detection
Default Settings
CO Line Application – Fax Detection – Fax Destination set to "None" for CO Line directory numbers 743,
747, 751, and 755. (Range is: any analog extension port directory number.)
Programming Abstract
Program the analog extension port connected to the facsimile machine as the Fax Destination for the CO
Line port(s) that will detect Fax tone.
Programming via the DET (Digital Extension Terminal)
back next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
•
Enter Database Administration using the feature code
++++++++
"
show
•
Press [ ]. The DB Item Select screen displays.
•
Input 07-02-01, then press [
chg
•
Press [ ].
•
Input the directory number of the analog port that is connected to the fax machine that will answer fax calls
answered on this line.
save
•
Press [ ].
next
•
Press [ ] to program the second fax circuit... through to the fourth fax circuit,
Or...
•
the Hold button
Press
Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
P7290 IMM
DX-80 I
NSTALLATION AND
show chg bksp
], [ ], [ ], and [
." (Note: This eight-character password can be changed.)
save
]. This advances to the first Fax circuit Destination screen (circuit 743).
to return to the previous menu level or press
3-134
M M
AINTENANCE ANUAL
CO Line Assignment
save
] are LCD interactive button operations. Use the
!+*
and then enter the DB Admin password
the Volume button
to return to the DB