Station Ports For Direct Department Calling - Comdial DSU II System Manual

DSU II Digital Telephone System
3.11.3

Station Ports For Direct Department Calling

Description: You can group stations by department to allow a call to search for an idle station within a
department. This search occurs when a busy or RNA is encountered at a called
department station. The system allows up to four departments with up to 16 stations and a
minimum of 3 stations in each one. You can place one additional station in each
department to serve as a termination station. Calls that roll to a termination station will
follow a call forward if it is set at that station.
To Program: 1. Dial 53.
2. Dial 19.
3. Dial 1–4 for department. 1–4.
4. Select department stations
5. Dial
6. Dial 5–8 for termination station in department 1–4.
7. Select termination station
8. Dial
—Station 10–57 = Dial 10–57.
to program next department.
—Station 10–57 = Dial 10– 57.
to program next department termination station
—OR—
dial for next station feature
—OR—
dial for configuration mode.
"STATION FEATURES"
"DEPT. CALLING "
"DEPARTMENT X
"DEPARTMENT X "
Programming The DSU II System 3 – 97
IMI66–132