IMI66–132
3.7.29
Voice Announce Blocking
Description:
This feature allows a station user to block voice-signaled intercom calls.
To Program: 1. Dial 53.
2. Dial 04.
3. Select station ports (LED On = Selected).
4. Dial
To clear current setting, repeat procedure.
3.7.30
Block Programming
Description:
You can use this station configuration procedure to assign those features that you have
assigned to any one station to any other station or to an entire block of stations. Block
programming includes any mapped button attributes (see section 3.8, Button Mapping
The Stations) that you have assigned to the model station port.
To Program: 1. Dial 58.
2. Select model station port (LED On = Selected)
3. Dial first station port in block (dial code as above).
4. Dial
5. Dial last station port in block (dial code as above).
6. Dial
7. Dial
NOTE:
3 – 76 Programming The DSU II System
—Station 10–57 = Dial 10–57 or press C10-C57.
for next station feature
— OR—
dial
for configuration mode.
— Station 10– 57 = dial 10–57 or press C10–C57. "MODEL STA XX"
#
.
#
.
for further block programming
—OR—
dial
for configuration mode.
The first, last and all station ports in between will be block programmed like
the model station port. To block program an individual station port, select the
first and last port to be the same number. (For example: 25, 26# 26#
programs station 26 exactly as 25 .)
DSU II Digital Telephone System
"STATION FEATURES"
"VOICE BLOCK"
"BLK PROGRAMMING "