System Alarm Reporting - Comdial DSU II System Manual

DSU II Digital Telephone System
3.4.9

System Alarm Reporting

The system can send special codes that convey certain system alarm conditions to selected stations where
they will show on their LCD displays.
System Alarm Report Enabling
Description: Enable the system alarm reporting on a system-wide basis using this feature.
To Program: 1. Dial 28.
2. Press A1 to toggle between enable and disable (LED On = Enable).
3. Dial
To change setting, repeat procedure and make different selection.
System Alarm Report Stations
Description: Enable the system alarm reporting on the desired stations using this feature.
To Program: 1. Dial 53.
2. Dial 28.
3. Select station ports for programming
4. Dial
To change setting, repeat procedure and make different selection.
—OR—
dial 1 to enable
dial 2 to disable.
for configuration mode.
—Station 10–57 = Dial 10–57, or press C10–C57.
for next station feature
—OR—
dial for configuration mode.
"ALARM REPORTS"
"MONITOR ENABLED"
"MONITOR DISABLED"
"STATION FEATURES"
"ALARM RECEIVE"
Programming The DSU II System 3 – 25
IMI66–132