Disd Incoming Rings; Enable/Disable Call Waiting Tone - Comdial DSU II System Manual

IMI66–132
3.12.4

DISD Incoming Rings

Description: The number of rings that occur on a DISD line before it is answered is programmable.
Setting a large number of rings allows time for a call to be serviced in a regular manner
by stations that have line appearance for the DISD line if such action is desired.
To Program: 1. Dial 45.
2. Press program button to choose operating mode
3. Select rings to occur before line is answered
4. Dial
5. Assign line ports to have designated ring (LED On = Assigned)
6. Press
To change setting, repeat procedure and make different selection.
3.12.5

Enable/Disable Call Waiting Tone

Description: The call waiting tone sent to the called party can be enabled or disabled.
To Program: 1. Dial 17 for system features.
2. Dial 11 for DISD call waiting tone.
3. Press A1 to toggle between enable and disable
6. Press
3 – 102 Programming The DSU II System
—Dial 1 or press A1 = normal mode
—Dial 2 or press A2 = night transfer (of ringing) mode. "DISD RINGS NITE X"
—Dial 0 for no rings (disables DISD for the line)
—Dial 1–9 = rings 1–9.
#.
—Line port 1–14 = Dial 01–14 or Press A1–A14
—Line port 15, 16 = Dial 15, 16 or Press B1, B2
—Line port 17-24 = Dial 17-24 or press HOLD then press A1–A8.
and repeat steps 2 and 3 for further DISD ring assignment
—OR—
press for configuration mode.
—OR—
Dial 1 to enable call waiting tones.
Dial 2 to disable call waiting tones.
for further system features
—OR—
press for configuration mode.
DSU II Digital Telephone System
"DISD RINGS"
"DISD RINGS DAY X"
"SYSTEM FEATURES"
"DISD CALL WAIT"