Remote Data Station; Creating Data Security Groups - Comdial DSU II System Manual

DSU II Digital Telephone System
3.22.2

Remote Data Station

Description: Use this procedure to program the system to allow remote control of a DIU from one or
more multiline digital telephones assigned to other station ports. Remote commands are
blocked when the station is busy with a call.
To Program: 1. Dial 53 for station features.
2. Dial 39 for data station.
3. Enter data station number.
4. Select station ports to be programmed
5. Dial
3.22.3

Creating Data Security Groups

Description: When using several DIUs, you can set up one through three data security groups. Use a
security group to prevent callers outside your group from accessing IST devices, such as
personal computers, within your group. Any number of stations can be put into one
group. Station to station calls can still be made. By default, all stations are assigned to
data security group 0 (no security group).
To Program: 1. Dial 53 for station features.
2. Dial 40 for data group.
3. Dial 1–3 for data group 1–3 or dial 0 for none.
4. Select station ports to be programmed
5. Dial
—for station 10–57, dial 10–57 or press C10–C57.
for next station feature,
—OR—
Dial for next configuration mode.
—for station 10–57, dial 10–57 or press C10–C57.
for next data group assignment
—OR—
Dial for next station feature
—OR—
Dial for next configuration mode.
"STA. FEATURES"
"DATA STATION"
"STA. FEATURES"
"DATA GROUP"
Programming The DSU II System 3 – 161
IMI66–132