DSU II Digital Telephone System
3.7.24
Service Observing
You can give selected stations the capability to monitor, in an un-announced manner, an active call at
another station.
Assign Service Observing
Description:
Select stations to have the service observe feature using this programming.
NOTE:
To Program: 1. Dial 53.
2. Dial 10.
3. Select station ports (LED On = Feature Assigned).
4. Dial
To clear current setting, repeat procedure.
Block Service Observing
Description:
You can block a user's capability to use service observing.
To Program: 1. Dial 53.
2. Dial 29.
3. Select station ports (LED On = Feature Assigned)
4. Dial
To clear current setting, repeat procedure.
Since this feature requires the executive override feature to function, the
system automatically enables that feature for the station when you enable
service observing. You can also arrange selected stations so that they cannot
be service observed.
—Station 10–57: Dial 10–57 or press C10–C57.
for next station feature
—OR—
dial
for configuration mode.
—Station 10–57 = Dial 10–57 or press C10–C57.
for next station feature
—OR—
dial
for configuration.
"STATION FEATURES"
"SERVICE OBSERVE "
"STATION FEATURES"
"UNOBSERVABLE "
Programming The DSU II System 3 – 71
IMI66–132