System Alarm Report Stations - Comdial DSU II System Manual

DSU II Digital Telephone System
3.7.28

System Alarm Report Stations

You can program the system to report any system alarms to designated stations.
Enable Alarm Reporting
Description: If you arrange the system to report alarms, also use this programming feature to enable
stations to display alarm reports after the station user takes appropriate action.
To Program: 1. Dial 28.
2. Press A1 to toggle between enable and disable (LED On = Enable)
3. Dial
To change setting, repeat procedure and make different selection.
Select Alarm Reporting Stations
Description: After you turn on the alarm reporting feature, use this procedure to select the alarm
reporting station.
To Program: 1. Dial 53.
2. Dial 28.
3. Select station ports (LED On = Selected)
4. Dial
To clear current setting, repeat procedure.
—OR—
dial 1 to enable
dial 2 to disable.
for configuration mode.
—Station 10–57: Dial 10–57 or press C10-C57.
for next station feature
—OR—
dial for configuration mode.
"ALARM REPORTS "
"STATION FEATURES"
"ALARM RECEIVE "
Programming The DSU II System 3 – 75
IMI66–132