Loading The Software - Comdial DSU II System Manual

IMI66–132
2.17.3

Loading The Software

Installing The Bootloader Interface
You must install the boot loader interface on your PC before you can install the system operating
software.
Installing The Bootloader Interface Software With Windows 95*
1. Insert the bootloader interface disk (labeled disk1) in your PC's disk drive.
2. From the
Start
3. At the prompt line, type: <drive>:\disk1\setup where <drive> is the letter of your source disk
drive.
4. Click . The Bootloader Interface installation window appears.
Ok
NOTE: Alternately, you can use the
then to the
Interface installation window appears.
5. Remove the bootloader interface disk from you computer's disk drive.
6. From the Bootloader Interface load window, follow the on-screen prompts to finish loading
the software. The installation creates a DSU II BTLDR I/F window complete with
appropriate icons.
NOTE: Your PC's screen may now show the DSU II BTLDR I/F folder; however, if it does
not: select
folder.
7. From the DSU II BTLDR I/F window, double click on the
8. Select Express
9. When you reach the prompt to restart windows, do so.
*Windows 95 is a registered trademark of Microsoft Corporation, Redmond, Washington
2 – 54 Installing The DSU II Digital Telephone System
menu, select .
Run
Explorer View
. Once there, double click on
disk1 folder
Start , then select Program
and follow the on-screen prompts.
DSU II Digital Telephone System
to navigate to the source <drive> and
setup.exe
s, and then navigate to DSU II BTLDR I/F
Install SKey Driver
and the Bootloader
icon.