Programming For Disd Operation - Comdial DSU II System Manual

IMI66–132
3.21.3

Programming For DISD Operation

Description: When you plan to enhance DISD operation with the DVA, you must first completely
program the system for DISD operation.
NOTE: You should set a DISD dial time that is as long as the maximum time needed
To Program: To enable the system for DISD operation, refer to section 3.12, Direct Inward Station
Dialing Configuration, and complete the following steps:
1. Program the dial time limit.
2. Assign a DISD Assist station.
3. Program the DISD Incoming Rings.
4. Program inhibit DISD digit dialing.
3 – 156 Programming The DSU II System
to complete the longest DVA message. For example, if the longest DVA
message is 60 seconds, set the DISD dial time to 60 seconds. If the DISD dial
time is longer than the DVA message, the message will repeat itself. If the
DISD dial time is shorter than the DVA message, the message will not finish.
DSU II Digital Telephone System