Do Not Disturb (Dnd) - Comdial DSU II System Manual

IMI66–132
3.4.3

Do Not Disturb (DND)

All of the following features are part of the Do Not Disturb (DND) application.
Do Not Disturb Button
Description: A telephone user can press a button (either one that you have mapped on that station or
one that is provided by an interactive button on an LCD speakerphone) to set the station
to a DND condition.
To program: 1. Dial 56.
2. Dial 07.
3. Select button to be programmed
4. Select station ports to be programmed with a DND button:
5. Dial
Do Not Disturb Inhibit
Description: You can inhibit the ability to set DND on a system-wide basis.
To Program: 1. Dial 19.
2. Press A1 to toggle between Enable and Disable (LED On = Enable)
3. Dial
To change setting, repeat procedure and make opposite selection.
3 – 18 Programming The DSU II System
—Press A1–A14, B1–B10.
— Station 10–57 = Dial 10––57, or press C10–C57.
for further DND button assignment
—OR—
dial for next button mapping feature
—OR—
dial for configuration mode.
To clear, dial 5604, press button, dial # and repeat steps 4 and 5.
—OR—
dial 1 to Enable (A1 LED On)
dial 2 to Disable.
for configuration mode.
DSU II Digital Telephone System
"BUTTON MAPPING "
"ASSIGN DND CODE "
"DND XXXXXXXX "
"DND ENABLED "
"DND DISABLED"