System Clock; System Speed Dial - Comdial DSU II System Manual

IMI66–132
3.4.10

System Clock

Description: The system clock maintains current date and time information. The system provides this
information to LCD speakerphones for display. Set the system time with this feature.
The system attendant also has access to this feature.
To Program: 1. Dial 01.
2. Dial
To change setting, repeat procedure and make different selection.
3.4.11

System Speed Dial

Description: The system speed dial is a system-wide list of numbers that all users can access for
automatic dialing. Those users with two-line display LCD speakerphones can scroll
through the list of names that you assign to the system speed dial numbers using their
speakerphone's display. After scrolling through the list, they can pick the name they wish
to call, and automatically dial the number assigned to the name. The system scrolls this
index of names in the sequence that you or the attendant sorted the entries; therefore, be
sure to arrange the entries in a sequence that best meets the system user's needs.
To Program: 1. Dial 02.
2. Dial 01–99 for storage location.
3. Dial # to clear current entry.
4. Choose line, line group, or intercom
5. Dial number for storage (32 digits max).
6. Press T/C button to program name.
7. Enter digits from character chart on the next page to spell name (up to 16 characters).
3 – 26 Programming The DSU II System
Long Form
—Dial 00–99 for yr.
—Dial 01–12 for mo.
—Dial 01–31 for day
—Dial 00–23 for hr.
—Dial 00–59 for min.
for configuration mode.
to be used with speed dial number.
—Line port 1–14 = Dial 01–14 or press A1–A14.
—Line port 15, 16 = Dial 15, 16 or press B1, B2.
—Line port 17–24 = Dial 17–24 or press HOLD, A1–A8.
—Dial 90 for last line used or prime line.
—Dial 91–94 for line group 1–4.
—Press ITCM button for intercom line.
—If required, press HOLD button to store a pause.
—If required, press TAP button to store a hookflash.
—OR—
Press T/C button to leave name blank.
DSU II Digital Telephone System
"SET CLOCK "
Short Form
—Dial 00–23 for hr.
—Dial 00–59 for min.
—Dial # to assign hours and minutes
"SYS SPEED DIAL"
"XXXXXXXX..."
"LINE: "
"LINE XX "
"PRIME LINE"
"LINE GROUP 1"
"XXXXX..."