Programming Toll Restriction Table Entries - Comdial DSU II System Manual

IMI66–132
3.19.2

Programming Toll Restriction Table Entries

To Program: 1. Dial 71.
2. Dial 01–16
3. Establish an allow or a deny table (A1 LED on = allow, A2 LED On = deny)
4. Dial 1–4 or press A8–A11 for entry number 1–4. "XXXXXX"
5. Dial
6. Dial keypad digits (0–9,
7. Dial
8. Dial
9. Dial
To change setting, repeat procedure and make different selection.
3 – 146 Programming The DSU II System
—OR—
press A1–A14, B1, B2 for toll table 1–16.
—Dial 5 or press A1 for allow
—Dial 6 or press A2 for deny.
#
to clear current entry.
#
for next entry and repeat steps 4–6 until all table restrictions are entered.
for next table and repeat steps 2–7 until all tables are entered.
for configuration mode.
DSU II Digital Telephone System
"TOLL TABLE"
"XXXXX TABLE Y"
"ALLOW TABLE Y"
"DENY TABLE Y"
) to enter numbers. "XXXXXX ..."