Configuring Com 2 Data Port (Required Programming); Setting The Audible First Ring Feature (Optional Programming) - Comdial DSU II System Manual

IMI66–132
3.23.3 Configuring COM 2 Serial Data Port (required programming)
Description: If the COM 2 serial data port is not currrently set at its default values (9600 baud, 8 data
bits, and 1 stop bit) program that port to have those values so that it will receive Caller ID
data.
To Program: 1. Dial 15.
2. Dial 2 for COM 2.
3. Press A10 for 9600 baud.
4. Dial 11 or press A14 for 8 data bits
5. Dial
3.23.4

Setting The Audible First Ring Feature (optional programming)

Description: Turns on the Audible First Ring feature for the system.
To Program: 1. Dial 17.
2. Dial 01.
3. Dial 1 to enable the audible first ring (LED on)
4. Press
3 – 166 Programming The DSU II System
and 1 stop bit.
for configuration mode.
—OR—
Dial 2 to silence the first ring on Caller ID lines.
for configuration mode.
DSU II Digital Telephone System
"BAUD RATE"
"W nD nS 9600"
"W 8D 1S ZZZZZ"
"SYSTEM FEATURES"
"CID FIRST RING"