Enable Sra Office And Area Code Tables - Comdial DSU II System Manual

DSU II Digital Telephone System
3.17.2 Enable SRA Office Code And Area Code Tables
Description: The office code table matches a dialed office code with one of the office codes that you
have entered in the table, and routes the call over the line group that you have entered for
that office code. The area code table matches a dialed area code with one of the area
codes that you have entered in the table, and routes the call over the line group that you
have entered for that area code.
NOTE: When programming the tables, note that all table entries are defaulted to line
To Program: 1. Type I
2. From the main menu, type 1 and press RETURN for system COS menu.
3. From the system COS menu, type 16 for specialized route access menu
4. From specialized route access menu, type 2 for office code table menu
5. Type 1–4 for line group to match office codes and press RETURN.
6. Type office code(s) for routing over programmed group number
7. To return to the main menu, press and hold CTRL and type C.
group 1; therefore, to minimize programming effort, assign area/office codes
with the fewest entries to line groups 2 through 4. For example: if you are
entering area codes 200 through 299 and codes 200 through 209 requires one
line group while codes 210 through 299 requires another line group, leave
line group 1 assigned to the larger quantity of entries that require the most
programming effort (210-299) and reprogram the line group for the smaller
quantity of entries.
Office Code Table
7 4 6 and press RETURN.
and press RETURN.
and press RETURN.
and press RETURN.
(type nnn or nnn,nnn,nnn,nnn for one code or several codes) or type ALL to assign
every office code from 000 through 999).
Programming The DSU II System 3 – 131
IMI66–132