Setting The Data Parameters - Comdial DSU II System Manual

DSU II Digital Telephone System
3.20.3

Setting The Data Parameters

Description: You must set the data parameters of the data port where you connect Tracker to 9600
baud, eight data bits, one stop bit, and no handshaking to ensure proper Tracker operation.
NOTE: The Tracker base station must also be programmed for 9600 baud so that it
To Program: 1. Dial 15.
2. Dial 1 for port A
3. Dial 0811 for data parameters.
4. Press
matches the DSU setting. The default Tracker base station baud setting is
9600; however, if you want to check or change the baud setting in the base
station, refer to section V, "Software Configuration," of 68P81101B25–O,
Alphanumeric Interface Option.
for configuration mode.
"BAUD RATE"
Programming The DSU II System 3 – 153
IMI66–132