Blank Buttons; Call Forward Button - Comdial DSU II System Manual

DSU II Digital Telephone System
3.8.3

Blank Buttons

Description: Blank those buttons that you want to be dynamic line buttons or autodial buttons.
NOTE:
To Program: 1. Dial 56.
2. Dial 04.
3. Select all buttons to be programmed
4. Dial #.
5. Select station ports (LED On = Selected).
6. Dial
3.8.4

Call Forward Button

Description: This button provides one-button forwarding of all calls to another extension.
To Program: 1. Dial 56.
2. Dial 11.
3. Select button to be programmed
4. Select station ports (LED On = Selected).
5. Dial
To clear assignment , dial 5604, press button, dial # select station, and dial
When blanking buttons, be sure a previously assigned button is idle (feature
not selected by user) before you blank it.
—Press A1–A14, B1– B10.
—Station 10–57 = Dial 10–57 or press C10-C57.
for further button blanking
—OR—
dial for next button mapping feature
—OR—
dial for configuration mode.
—Press A1–A14, B1–B10.
—Station 10–57 = Dial 10– 57 or press C10–C57.
for next CALL FORWARD button assignment
—OR—
dial for next button mapping feature
—OR—
dial for configuration mode.
"BUTTON MAPPING"
"BLANK/AUTODIAL"
"BUTTON MAPPING"
"ASSIGN CALL FWD "
Programming The DSU II System 3 – 79
IMI66–132
.