Station Monitoring; Visual Ring Indication - Comdial DSU II System Manual

IMI66–132
3.4.8

Station Monitoring

You can enable two types of station monitoring: visual ring indication and audible monitoring.

Visual Ring Indication

Description: The DSS/BLF at a station provides idle, busy, and ringing status of all of the monitored
stations. If users deem the flashing BLF lights associated with visual ring indication
distracting, you can disable this visual indication system-wide using this procedure.
To Program: 1. Dial 20.
2. Press A1 to toggle between enable and disable (LED On = Enable)
3. Dial
To change setting, repeat procedure and make opposite selection.
Audible Monitoring (Station Monitoring)
Description: If you enable this visual ring indication, you can also enable audible indication of both
direct and delayed ringing on a per-station basis if you wish.
To Program: 1. Dial 53.
2. Dial 20.
3. Dial 1 for no audible monitoring.
4. Select stations for programming:
5. Dial
To change setting, repeat procedure and make different selection.
3 – 24 Programming The DSU II System
—OR—
—dial 1 to Enable (A1 LED = On)
—dial 2 to Disable.
for configuration mode.
Dial 2 for direct ring monitoring
Dial 3 for delayed ring monitoring.
—Station 10–57 = Dial 10– 57, or press C10–C57.
next monitoring condition
—OR—
dial for next station feature
—OR—
Dial for configuration mode.
DSU II Digital Telephone System
"MONITOR XXXXXXX"
"MONITOR ENABLED"
"MONITOR DISABLED"
"STATION FEATURES"
"AUDIBLE MONITOR "
"NONE"
"DIRECT RING"
"DELAYED RING"