Line Names - Comdial DSU II System Manual

IMI66–132
3.6.5

Line Names

Description: You can name lines as to their function to identify them for use. Names such as WATTS,
CO, etc., when appearing on the LCD speakerphone displays, make locating a desired
line easier for the station user to do. A line name can contain up to five characters. See
the chart on the following page for the line-name characters.
To Program: 1. Dial 34.
2. Select line ports to be assigned
3. Press # to clear current name.
4. Dial line name character codes (5 characters maximum for each line port from the
5. Dial
To change setting, repeat procedure and make different selection.
3 – 38 Programming The DSU II System
—Line port 1–14 = Dial 01–14 or press A1–A14
—Line port 15, 16 = Dial 15, 16 or press B1, B2
—Line port 17–24 = Dial 17– 24 or press HOLD then press A1–A8.
character code table shown on the next page—each character is represented by two
digits).
Examples: —WATTS = Dial 91 21 81 81 73
—0156 = Dial 00, 01, 05, 06
and repeat last three steps for next line
—OR—
dial for configuration mode.
DSU II Digital Telephone System
"LINE NAME"