Station Disable; Station Name - Comdial DSU II System Manual

IMI66–132
3.7.25

Station Disable

Description: You can disable station ports on a per station basis.
To Program: 1. Dial 59.
2. Select station ports to be disabled (LED On = Disabled)
3. Dial
To enable station, repeat procedure and make opposite selection.
3.7.26

Station Name

Description: You can assign individual names or category names to stations. These names will then be
displayed by LCD speakerphones when they are called by the named stations. Typical
names could be TEC SER, MKT 1, J Smith. System attendants also have access to this
station naming feature.
To Program: 1. Dial 06.
2. Select station port (LED On = Selected).
3. Dial
4. Refer to character code table, and compose station name (7 digits maximum).
5. Dial two-digit codes to form station name.
6. Dial
To change setting, repeat procedure and make different selection.
3 – 72 Programming The DSU II System
— Station 10–57: Dial 10–57 or press C10–C57.
for configuration mode.
—Station 10–57: Dial 10–57 or press C10–C57.
#
to clear current station name.
for next station and repeat steps 2–5
—OR—
dial for configuration mode.
DSU II Digital Telephone System
"DISABLE STATIONS"
"STATION NAMES "
"XXXXXX "
"XXXXXXX YYYYYYY"