Pulse/Tone Switchable - Comdial DSU II System Manual

IMI66–132
3.6.8

Pulse/Tone Switchable

You can configure individual lines to have tone dialing or pulse dialing at default.
Pulse Dialing
Description: If the installer has connected rotary dial lines to the system, you must condition those line
ports as pulse dial ports.
NOTE:
To Program: 1. Dial 36.
2. Select pulse dial line ports (LED On = Pulse):
3. Dial
To change setting, repeat procedure and make different selection.
Tone Dialing
Description: If the installer has connected tone dial lines to the system, you must condition those line
ports as tone dial ports.
To Program: 1. Dial 37.
2. Select pulse dial line ports (LED On = Pulse):
To change setting, repeat procedure and make different selection.
3 – 42 Programming The DSU II System
The user can switch from pulse dialing (rotary dial signaling) to tone dialing
(dual tone multiple frequency—DTMF) for accessing special circuits
requiring DTMF tones, such as banking machines, when they need to do so
from a rotary dial line.
—Line port 1– 14 = Dial 01–14 or Press A1–A14.
—Line port 15, 16 = Dial 15, 16 or press B1, B2.
—Line port 17–24 = Dial 17– 24 or press HOLD then press A1–A8
—OR—
dial 00 to default all lines to pulse dial.
for configuration mode.
—Line port 1– 14 = Dial 01–14 or Press A1–A14.
—Line port 15, 16 = Dial 15, 16 or press B1, B2.
—Line port 17–24 = Dial 17– 24 or press HOLD then press A1–A8
—OR—
dial 00 to default all lines to tone dial.
3. Dial for configuration mode.
DSU II Digital Telephone System
"PULSE DIAL"
"TONE DIAL"