Headset Interface - Comdial DSU II System Manual

IMI66–132
3.7.16

Headset Interface

You can program LCD speakerphones equipped with the optional headset jack to use a headset as well as
the handset or speakerphone.
NOTE:
The system delivers subdued off-hook voice announcements (SOHVA) to the headset.
Because a headset exhibits a coupling effect between the earpiece and microphone, it may
allow the outside party to hear a SOHVA message. You should inform the user of this
possibility.
Headset Operation As A Class Of service
Description: When employing DigiTech speakerphones (models 7700S, rev. H and earlier, and 7016S
only), you must use this programming procedure to arrange for a station port to allow
headset operation.
To Program: 1. Dial 53.
2. Dial 13.
3. Select station ports (LED On = Feature Assigned)
4. Dial
To change setting, repeat procedure and make opposite selection.
Headset Operation As A User Function
Description: To arrange for headset operation at a user's telephone ( DigiTech models 7700S, rev. I
and later, Impact model 8024S, and Impression models 20nnn and 21nnn) you must
program a headset button at the LCD speakerphone to activate the headset option.
To Program: 1. Press INTERCOM at the user's telephone.
2. Dial
3. Select button to be programmed.
4. Dial 94.
5. Press SPEAKER to end.
NOTE:
3 – 62 Programming The DSU II System
—Station 10–57: Dial 10–57 or press C10–C57.
for next station feature
—OR—
dial for configuration mode.
1.
—Press A1–A14, B1–B10.
On Impression telephones (models 20nnn and 21nnn) you must disconnect
the handset and plug the headset cord in its place.
DSU II Digital Telephone System
"STATION FEATURES"
"HEADSET MODE"