IMI66–132
2.18.4
Supporting Caller Identification Service
You can provide Caller ID information through the serial data port COM2 using the Caller ID
Interface (product code CID08) and a special equipment-supplied cable. Caller ID information
for incoming calls shows on the displays of the system's LCD speakerphones.
Make the connections that are detailed in the following statements.
• Connect the CO lines providing Caller ID data to both the common equipment and the
CID08 line jacks in the same numerical order.
• Connect the CID08-supplied cable between the CID08 and the COM2 serial data
connection on the common equipment.
• With the Caller ID Interface installed, you can also add two leads to provide the TD and SG
signals to a data printer or personal computer (PC). These leads are useful for adding caller
ID enhancement to the SMDA/SMDR printout or for providing messages in the ASCII
format suitable for use with PC-based applications programs.
To Central Office Line Connections
Cross
Connection
Block
Lines to CID08
Caller ID
Interface
8 7 6 5 4 3 2 1
2 – 76 Installing The DSU II Digital Telephone System
To AC Outlet
Ports
CID08 Caller ID Interface
Connecting The Caller ID Interface
Lines to Common
Equipment
Modular Jacks
Customer-
Supplied
Cable
OUT
PWR
IN
RS-232
RS-232
DSU II Digital Telephone System
Common
Equipment
Cabinet
7, 8
5, 6
Modular
Line
3, 4
Ports
1, 2
Serial
Data Port
COM2
dsu261.cdr