Access Denied - Comdial DSU II System Manual

IMI66–132
3.7.1

Access Denied

Description: You can deny access to certain lines at certain stations. When you do this, a station user
cannot select a denied line.
To Program: 1. Dial 54.
2. Dial 5.
3. Select line ports (LED On = Access Denied)
4. Dial # when all line ports are selected.
5. Select station ports (LED On = Feature Assigned)
6. Dial
To change setting, repeat procedure and make different selection.
To clear current setting, repeat procedure.
3 – 46 Programming The DSU II System
—Line port 1–14 = Dial 01–14 or press A1–A14
—Line port 15, 16 = Dial 15, 16 or press B1, B2
—Line port 17–24 = Dial 17–24 or press HOLD then press A1–A8.
—Station 10–57 = Dial 10–57 or press C10–C57.
when all station ports are selected
—OR—
dial for next station/line feature
—OR—
dial for configuration mode.
DSU II Digital Telephone System
"STA/LINE CONFIG."
"ACCESS DENY"