Converting Button Designations - Comdial DSU II System Manual

DSU II Digital Telephone System
3.2.3

Converting Button Designations

When you first power a new DSU II system with no telephones connected, it defaults its station
ports as Impact 24-line speakerphones.
When you connect a telephone to a powered-up system or when you turn on the AC power to a
system after you have connected a telephone to it, the system automatically button maps the
telephone according to the type of software the system has. To change the button mapping
default, install different software and master clear the system.
The buttons on Impact telephones are designated as L buttons; the buttons on DigiTech and
Impression telephones are designated as A and B buttons. Table 3–1 lists each A and B button
and its equivalent on an Impact telephone. The programming steps in this manual use A and B
button designations; if you are programming from an Impact telephone, you must use the proper
telephone programming overlay with the A and B designations. Telephone overlays are included
with the literature package for the digital telephone system. You can also find sample overlays at
the end of Chapter 4, Records.
Table 3–1: Impression, DigiTech And Impact Programming Buttons
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
A15
A16
B1
B2
B3
B4
B5
B6
When you perform class of service programming from stations 10 or 12 and you have placed an
Impact telephone at the programming port, you should place the programming overlay on it.
Impression DigiTech
A1
A2
A3
A4
A5
A6
A7
A8
A9
A10
A11
A12
A13
A14
B9
B10
B1
B2
B3
B4
B5
B6
B7
B8
Impact
L01
L02
L03
L04
L05
L06
L07
L08
L09
L10
L11
L12
L13
L14
L15
L16
L17
L18
L19
L20
L21
L22
L23
L24
Programming The DSU II System 3 – 9
IMI66–132