Saved Number Redial - Comdial DSU II System Manual

IMI66–132
Ringing Line Preference
The system can be programmed on a per station basis to provide ringing line preference
on all lines programmed for ringing at the station. When ringing line preference is
enabled at a station, taking the handset off-hook automatically connects the station to any
outside line that is ringing at it. A line button will not have to be pressed. With ringing
line preference enabled, the telephones denote a ringing line with an orange colored
status light. If a station also has prime line assigned, the prime line will always be
answered first even though it may be the second line to ring. The ability of a particular
station to answer a ringing line without line selection is enabled by the station class of
service programming.
See also, Line Features.
S

Saved Number Redial

This feature enables a button action to save the first 16 digits of the last number manually
dialed from the keypad. The saved number can be redialed at a later time. The saved
number is permanently available for later use until it is replaced with a new number.
When the caller identification feature is active, this saved number redial feature will save
the identified number for redial.
See also, Redial.
Scout 900
MX
The DSU II supports the Scout 900
is a 900 megahertz, spread-spectrum, wireless telephone. While the Scout operates much
like an Impact telephone, you should note that a few operational differences do exist. The
"Call Announce Receive" and "All Call Receive" features require that you install and
enable a headset. The Scout does not support the "Autoredial" or "voice response to
SOHVA." It is a good idea to program any Scout telephone station port with "Delayed
Ringing" to an ExecuMail port or attendant station in case the user is out of range when
he or she receives a call.
The Scout does have a range test that the installer or user can perform. Comdial highly
recommends that the installer perform a preliminary on-site range test to make sure the
Scout meets the customer's needs (for more information on how to use the range-test
feature, see GCA70–308).
There is no limit to the number of Scout telephones that you can install on a system.
However, because of channel restrictions, only nine Scouts can be in use at one time
A – 58 Digital Telephone System Features
Digital Wireless Telephone
Digital Wireless Telephone. The Scout telephone
MX
DSU II Digital Telephone System