Smda Records Deleted By The Attendant - Comdial DSU II System Manual

DSU II Digital Telephone System
3.18.5

SMDA Records Deleted By The Attendant

Description: This programming step gives the attendant station the ability to delete SMDA records
when commanded to do so by its user. During day-to-day system operation, when
SMDA records exceed storage capacity, the attendant can delete current records to make
room for additional ones if you perform this programming step. Typically the attendant
would do this after he or she has requested the system to print an SMDA report. If you
have set the system to delete the records after it has generated an automatic report, you
usually do not need to give the attendant this manual deletion feature.
To Program: 1. Dial 18.
2. Press A1 to toggle between enable and disable (LED On = Enable)
3. Dial
To change setting, repeat procedure and make opposite selection.
—OR—
dial 1 to Enable
dial 2 to Disable.
for configuration mode.
"ATTN DELETE XXX"
"ATTN DELETE ON"
"ATTN DELETE OFF"
Programming The DSU II System 3 – 143
IMI66–132