Master Clearing And Defaulting The System; Master Clearing The System; Defaulting The System; Defaulting The Lines - Comdial DSU II System Manual

IMI66–132
3.3

Master Clearing and Defaulting The System

You can return the entire programming configuration to the factory settings using the master clear
procedure. You can also return the individual system, line, and station class of service configurations to
their factory settings using the system, line, and station default procedures. The operating parameters and
class of service values provided by the factory settings will provide satisfactory performance in a broad
range of site applications.
Not only does the master clear procedure return ALL programmed variables to a
known state of operation it also clears all currently stored autodial and speed dial
numbers.
3.3.1

Master Clearing The System

Description: Returns entire system configuration to factory settings and clears all stored auto and
speed dial numbers.
To Program: 1. Press INTERCOM, dial
2. Dial 90.
3. Dial 5 1 6 8 4 to clear the entire system.
3.3.2

Defaulting The System

Description: Returns the system configuration features to factory settings.
To Program: 1. Press INTERCOM, dial
2. Dial 10.
3. Press # to default system features.
3.3.3

Defaulting The Lines

Description Returns the line configuration features to factory settings.
To Program: 1. Press INTERCOM, dial
2. Dial 30.
3. Press # to default line features.
3 – 12 Programming The DSU II System
System returns to normal operation mode automatically.
System returns to configuration mode automatically.
System returns to configuration mode automatically.
DSU II Digital Telephone System
CAUTION
# 7 4 6 . "CONFIG. MODE"
"MASTER CLEAR"
# 7 4 6 . "CONFIG. MODE"
"SYSTEM DEFAULT"
# 7 4 6 . "CONFIG. MODE"
"LINE DEFAULT"