Voice Mail Port - Comdial DSU II System Manual

DSU II Digital Telephone System
3.14.1

Voice Mail Port

Assign The Voice Mail Port
Description: When you connect the voice mail equipment to a common equipment station port either
through an IST interface or directly to the port (depending upon the type of voice mail
equipment you are using), you must use this assign voice mail port feature to enable the
station port as a voice mail port. This feature only applies to voice mail systems
supported by Comdial's proprietary DTMF integration. Once you perform this step, the
station port will only emit DTMF tones (it will not emit INTERCOM tones or ring-back
tones).
NOTE: When you are interfacing voice mail equipment through an ATI-D device
To Program: 1. Dial 53.
2. Dial 32.
3. Select station ports to be programmed (LED On = Selected)
4. Dial
and you later replace the ATI-D with a proprietary digital multiline
telephone, the system automatically disables the port as a voice mail port;
however, if you disconnect the voice mail equipment from the ATI-D and
replace it with a model 2500 telephone, you must reprogram the station port
so that it is no longer programmed as a voice mail port.
—Station 10–57 = Dial 10–57 or press C10–C57.
for next feature
—OR—
dial for configuration mode.
"STATION FEATURES"
"VOICE MAIL PORT "
Programming The DSU II System 3 – 105
IMI66–132