Call Forward - Co Line Predefined (No Answer Condition) - Comdial DX-80 Installation And Maintenance Manual

•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
Program the various system External Call Forward parameters:
¢£¤¥
•
Use
¢£¤¥
•
Use
¢£¤¥
•
Use
«
Then press until the appropriate value displays for the data item.
•
When you have completed all changes, press the
screen. You will see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Call Forward – CO Line Predefined (No Answer condition)
Incoming CO Lines can be designated to forward via a system timed setting to a predefined system resource. The
predefined forward destination can be an extension, UCD Group (includes Voice Mail and Hunt Groups) or Virtual
Number. One predefined location is available per CO Line regardless of status of ringing mode - Day, Evening,
Alternate or Timed. The line will forward to the predefined destination after the programmed CO Line Preset FWD
timer has expired.
Call Forward – CO Line Predefined is a No Answer condition forward.
Related Features
Call Forward – Extension
Call Forward - Extension – Predefined
Related Programming
CO Line - Line Type, Answering Position
Call Handling - CO Line Predefined CFW
Extension Application - Uniform Call Distribution
Extension - Line Assignment, Receive Assignment
Conditions
a) Call Forward - CO Line Predefined is a system programmed feature and will follow the programmed
conditions unless an extension call forward has been enabled and the timer for the extension call forwarding
is programmed at a shorter time than the Predefined timer.
P7290 IMM
DX-80 I
NSTALLATION AND
to highlight "Call Handling." Then press
to highlight "Category 2." Then press
to highlight either database item "External CFW – Service" or "External CFW – Talk Time."
M M
AINTENANCE ANUAL
«
.
«
.
°
(escape) key to exit this database programming
CO Line Answering Position
Uniform Call Distribution Groups
3-48