Attendant / Extension Dss Console Button Programming - Comdial DX-80 Installation And Maintenance Manual

•
You will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave System Reminder unchanged.
•
Press "Y" to save changes.
•
Continue making other programming changes or exit PC-DBA programming.
Program Attendant Extension User Password:
•
The default password is 9999. Reference "Extension User Password" for programming instructions of this
feature.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Attendant / Extension DSS Console Button Programming

!,4
The Attendant/Extension DSS Console has 60 buttons that may be programmed for any of the available DX-80
system directory numbers. Forty-eight of the sixty buttons have dual colored LED's and are user and/or system
programmable for any system directory number; System Speed Dial, CO Lines and DSS/BLF extensions. The
remaining twelve buttons on the Attendant/Extension DSS Console are not equipped with an LED and are better
suited for directory numbers of features that don't require status indication (like Background Music).
Related Features
Attendant / Extension DSS Console
Related Programming
None
Operation
back back back back next next next next
Note: [ ], [ ], [
three buttons below the LCD display to actuate the associated operation.
!+4
1. Press
2. Press the programmable feature button on the console you wish to view or change.
show show
show show
3. Press [ ] to view more details.
Or...
chg chg chg chg
4. [ ] to change the directory number for the selected button.
5. Input the valid Directory Number for the selected function.
save save save save
6. Press [ ] to store the change.
7. Press a different button to make additional changes or exit button programming by toggling the
button, or by going off hook and back on hook with the handset.
Conditions
a) Only directory numbers can be programmed on DSS Console buttons.
b) The Attendant/Extension DSS Console must be assigned to operate with your extension in order to program
buttons.
Default Setting
The button map of each DSS Console is defaulted for extensions 101-148, Auto Dial (System Speed Dial)
500-507, All Page, Page Zones 1 and 2, External Page, Music Channels 1 and 2, and Pick Up Groups 1 and
2.
P7290 IMM
DX-80 I
NSTALLATION AND
show show show show chg chg chg chg bksp bksp bksp bksp
], [ ], [ ], and [
.
M M
AINTENANCE ANUAL
save save save save
] are interactive LCD button operations. Use the
3-17
On/Off