Chapter 7
CLI – Layer 3
Example:
To specify simple authentication to be used in RIP Version 2 packets on the interface
"marketing".
Router(config-if:marketing)# ip rip authentication mode simple
ip rip authentication key Command
Use the ip rip authentication key command to set the authentication
string used on the interface. The no form of this command clears the password.
The syntax for this command is:
[no] ip rip authentication key <password>
password
Example:
To set the authentication string used on the interface "marketing" to be "hush-
hush".
Router-N(config-if:marketing)# ip rip authentication key hush-
hush
182
The authentication string for the interface. Up to 16 characters are
allowed.
P334T-ML User's Guide