Ping Command; Traceroute Command; Session Command - Avaya P334T-ML User Manual

ping Command

Use the ping command to check host reachability and network connectivity.
The syntax for this command is:
ping <host> [<packetsize> [<interval>]]
host
packetsize
interval
Example:
Router-N> ping 149.49.50.13 5 8
Example:
Router-N> ping 149.49.50.13

traceroute Command

Use the traceroute command as a trace route utility.
The syntax for this command is:
traceroute <host>
host
Example:
Router-N> traceroute 192.168.50.13

session Command

See session on page 56.
P334T-ML User's Guide
IP address of the target system.
An integer, the size of the packet sent during a ping
operation. The default is 56 bytes.
An integer, the number of seconds between
successive ping messages. The default is 1 second.
IP address.
Chapter 7 CLI – Layer 3
157