Chapter 7
CLI – Layer 3
clear vlan Command
Use the clear vlan command to Delete Router layer 2 interface.
The syntax for this command is:
clear vlan [<vlan-id>] | [name <vlan-name>]
vlan-id
vlan-name
Note: If you wish to define a name which includes spaces, you must enclose the
entire name in quotation marks, e.g. "new york".
Tech Command
Use the tech command to enter tech mode. This command is reserved for service
personnel use only.
212
Interface Index
Interface name (used in layer 3 protocols)
P334T-ML User's Guide