Show Module - Avaya P334T-ML User Manual

Chapter 6 CLI – Layer 2

show module

Use the show module command to display switch status and information. For
each switch with an expansion sub-module installed, both switch and expansion
sub-module type and information are shown.
The syntax for this command is:
show module [<mod_num>]
mod_num
Output Example:
P330-1(super)# show module
Mod
--- -------------
1 P334T-ML
NoCascade
BUPS-ML
Output Fields
Field
Mod
Type
C/S
S/N
Statuses
72
(Optional) Number of the switch/expansion sub-module. If
you do not specify a number, all switches/expansion sub-
modules are shown.
Type C/S
---- --------
1.0 4416117
Description
Switch number
Module Type/BUPS
(Hardware) Configuration Symbol of the module/
expansion sub-module
Serial number of the switch
Status of the module/BUPS/Fans
S/N Statuses
-----------------------------
PS:AC Fans:Ok Mode:Layer2
Conn-Up:None Conn-Down:None
BUPS:Not Prsnt Fans:None Type:None
Avaya P334T-ML User's Guide