Rmon Event; Copy Stack-Config Tftp - Avaya P334T-ML User Manual

Chapter 6 CLI – Layer 2
alarm 1026 was created successfully

rmon event

Use the rmon event command to create an RMON event entry.
The syntax for this command is:
rmon event <Event Number> <type> description <description>
owner <owner>
event number
type
description
owner
Output Example:
P330-N#
monitoring amir's computer" owner amir
event 1054 was created successfully

copy stack-config tftp

Use the copy stack-config tftp command to upload the stack-level
parameters from the current NVRAM running configuration into a file via TFTP.
Note: Create the file into which you wish to upload the stack-level parameters prior
to executing this command.
The syntax for this command is:
copy stack-config tftp <filename> <ip>
filename
ip
Output Example:
P330-N# copy stack-config tftp c:\conf.cfg 192.168.49.10
Beginning upload operation ...
138
This is the event index number of this entry.
The type of the event. The possible parameters are:
trap, log, logAndTrap, none.
A user description of this event
Owner name string
rmon event 1054 logAndTrap description "event for
The file name (full path)
The IP address of the TFTP server
Avaya P334T-ML User's Guide