Set Allowed Managers; Set Allowed Managers Ip; Set Psu Type - Avaya P334T-ML User Manual

Chapter 6 CLI – Layer 2
Note: If you wish to define a string which includes spaces, you must enclose the
entire string in quotation marks, e.g. "new york".

set allowed managers

Use the set allowed managers command to enable/disable the Allowed
Managers feature. When this feature is enabled, only those stations whose IP
addresses are listed in the Allowed Managers table can access the device over
Telnet, SNMP, or HTTP.
The syntax for this command is:
set allowed managers [enabled|disabled]
Output Example:
P330-N> set allowed managers enabled
Managers are enabled

set allowed managers IP

Use the set allowed managers IP command to add or remove an IP address
from the Allowed Managers table. The Allowed Managers table can contain up to
twenty IP addresses.
The syntax for this command is:
set allowed managers ip [add|delete][IP address]
Output Example:
P330-N> P330-1(super)# set allowed managers ip add
149.49.32.134
Ip was added to the table
Note: The Allowed Managers feature will not operate correctly if the IP address
specified with the set allowed managers IP command is changed before it
reaches the switch (as a result of NAT.proxy cache, etc.).

set psu type

Use the set psu type command to set the main power supply type (AC/DC) of
132
Avaya P334T-ML User's Guide