Show Autopartition - Avaya P334T-ML User Manual

Chapter 6 CLI – Layer 2
Designated
Root Cost
Designated
Root Port
Root Max Age
Hello Time
Bridge ID
MAC ADDR
Bridge ID
Priority
Port
State
Cost
Priority

show autopartition

Use the show autopartition command to display the automatic partition status
for 10/100 ports witnhin a module.
Note: Autopartition for the P330-ML switches will always have the value
disabled. This command is used to display the autopartition status for the other
P330 switches in the stack.
The syntax for this command is:
show autopartition [module]
Example:
P330-N> show autopartition 1
Mod
--- -----------
1 Enable
78
Total path cost to reach the root
Port through which the root bridge can be reached (shown only
on nonroot bridges)
Amount of time a BPDU packet should be considered valid
Number of times the root bridge sends BPDUs
Bridge MAC address used in the sent BPDUs
Bridge priority
Port number
Spanning-tree port state (disabled, inactive, not-connected,
blocking, listening, learning, forwarding, bridging, or type-
pvid-inconsistent)
Cost associated with the port
Priority associated with the port
Mode
Avaya P334T-ML User's Guide