Panel Unit - Epson Stylus Photo R2000s Series Service Manual

EPSON Stylus Photo R1900/R2880/R2000/R2000s/SC-P400 Series

Align the positioning tabs (one each on the left/right) with the
positioning holes (one each on the left/right) on the Upper
Housing.

Align the positioning tabs (three each on the left/right) with the
positioning holes (three each on the left/right) on the Decoration
Plate Left/Right and the Lower Housing.
Positioning tab
Figure 4-12. Reinstalling the Rear Housing
Disassembly And Assembly
Hook this to the
Upper Housing
Positioning tab

4.2.5 Panel Unit

1. Open the Printer Cover.
Before opening the Front Cover and CDR Tray Base, unlock the
C A U T I O N
Carriage.
Opening/Closing the CDR Tray Base
2. Open the Front Cover and CDR Tray Base.
Removing the Housings
(Refer to "4.1.6 Locking/Unlocking the Carriage and
(p75)")
Panel Unit
Front Cover
Figure 4-13. Removing the Panel Unit (1)
Revision I
Printer Cover
80