Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
¢£¤¥
•
Use
to highlight "Call Handling." Then press
¢£¤¥
•
Use
to highlight "Category 1." Then press
¢£¤¥
•
Use
to highlight the database item "Hold Reminder" to change the interval of this tone
reminder.
«
•
Press
. Each time that enter is pressed the value of this database item is updated.
¢£¤¥
•
Use
to highlight the database item "Hold Recall – SLT" to change the time that calls placed on
hold at analog devices remain on hold before ringing-back to the extension that placed them on hold.
«
•
Press
. Each time that enter is pressed the value of this database item is updated.
¢£¤¥
•
Use
on hold at Digital Speakerphones remain on hold before ringing-back to the extension that placed them on
hold.
«
•
Press
. Each time that enter is pressed the value of this database item is updated.
•
Continue making other programming changes as required.
•
When you have completed all changes, press the
screen. You will see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press
(escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Hold – Exclusive
When using the feature button and the hold button together, you may place an outside call on private/exclusive hold.
The held line will appear in use at other extensions.
Related Features
Hold Reminder
Hold - Common (System)
Related Programming
Call Handling - Ex_Hold Time, Hold Recall, Hold Reminder
P7290 IMM
DX-80 I
NSTALLATION AND
to highlight the database item "Hold Recall – DEKT" to change the time that calls placed
M
M
AINTENANCE
ANUAL
«
.
«
.
«
.
°
(escape) key to exit this database programming
Hold - System
Call Handling - Hold Reminder
3-157
!