Forced Intercom Call Forward; Forced Intercom Tone Ring - Comdial DX-80 Installation And Maintenance Manual

•
When you have completed all changes, press the
screen. You will see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Make other directory number changes in the same manner for each system resource directory number to be
changed.
•
Exit PC-DBA programming when finished.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.

Forced Intercom Call Forward

Tone ringing intercom calls can be immediately forwarded to the attendant by pressing the DND button.
Related Features
Do Not Disturb
Call Forward
Operation
1. When your telephone is set to Tone Ring and another station is calling you: The telephone will display:
!4
2. Press . The display will show:
3. The ring is discontinued and the call is sent to the programmed attendant.
Your extension remains in Do Not Disturb until deactivated.
Conditions
a) The attendant assigned extension cannot invoke Forced Intercom Call Forward.
b) When Forced Intercom Call Forward is activated, the calling party connection is an intercom call to the
attendant extension.
c) You cannot activate Forced Intercom Call Forward if another Call Forward mode is already enabled.

Forced Intercom Tone Ring

In certain conditions a Voice Announce call may not be heard at the receiving extension (usually because
background noise is high or the speaker volume setting has been minimized for a prior call). Forced Intercom Tone
Ringing allows the intercom call initiator to cause the called telephone to ring. After a Voice Announce connection has
been established to an extension, you may change the alert signal at the called extension from Voice Announce to
Tone Ring.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
°
(escape) key to exit this database programming
STA xx CALLING
DO NOT DISTURB
3-151
M
ANUAL
!4
Intercom Mode Selection
*