•
Input 03-02, then press [
chg
•
Press [
] until the appropriate CO Line hook-flash timing displays.
•
the Hold button
Press
return to the DB Item Selection screen or exit programming.
Programming via PC-DBA
Note: PC-DBA is a DOS-based programming utility.
•
Enter PC-DBA by typing "DX-80" at the DOS prompt in the PC-DBA working directory and then pressing
«
.
•
Press any key at the program title page (as it requests) to enter the Main Menu.
•
Select PC-DBA from the main menu.
•
Select Programming from the PC-DBA menu. Then press
¢£¤¥
•
Use
to highlight "Call Handling." Then press
¢£¤¥
•
Use
to highlight "Category 1." Then press
¢£¤¥
•
Use
to highlight "CO Flash."
«
•
Press
until the appropriate CO Line hook-flash timing displays.
•
When you have completed all changes, press the
screen. You will see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press
(escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Flash – PBX Line
Flash – PBX Line is a programmed setting that will determine what flash timing will be presented to the host
telephone system when the DX-80 is installed as a subordinate system. This feature is critical to perform accurate
host-system functions like PBX call transfer. When used "behind" a PBX, the DX-80 system extensions should have
the Flash feature code programmed onto a Flexible Feature Button for easy access.
Related Features
Speed Dial (System and Station)
Last Number Redial
Related Programming
Call Handling – PBX Flash Time
P7290 IMM
DX-80 I
NSTALLATION AND
save
]. This advances to CO FLASH programming.
to return to the previous menu level or press
°
3-143
M
M
AINTENANCE
ANUAL
the Volume button (up or down)
«
.
«
.
«
.
(escape) key to exit this database programming
Memo Pad
Automatic Redial
to
!3