¢£¤¥
•
Use
¢£¤¥
•
Use
«
•
.
Press
Each time that enter is pressed the value of this database item is updated.
•
When you have completed all changes, press the
screen. You will see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press
(escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
Distinctive Ringing – Extension
Distinctive Ringing – Extension provides a means for denoting one ringing extension from another. There are eight
(8) choices are available for an extension to choose.
Related Features
CO Line – Answering Position
Distinctive Ringing – CO Line
Default Settings
Distinctive Ringing is set to 1. (Range is 1~8.)
Operation
1.
Press the Distinctive Ringing Tone code
2.
The current Tone is heard and the setting displays
chg
chg
chg
chg
3.
Press [
] until the appropriate tone is heard and displayed.
Conditions
a)
CO Line – Distinctive Ringing overrides an extensions setting of Distinctive Ringing.
b)
The Distinctive Ringing code may be programmed on any available Feature button.
Default Settings
CO Line – Category 2 – CO Ring Type is set to "0" for all CO Lines. (Range is: 0-8.)
P7290 IMM
DX-80 I
NSTALLATION AND
to highlight "Category 2." Then press
to highlight the database item "CO Ring Type" for the CO Line to be changed.
!)7
RING TYPE
chg
M
M
AINTENANCE
ANUAL
«
.
°
(escape) key to exit this database programming
Transfer
.
:1
3-113
)7