Co Line Ringing Modes !63 - Comdial DX-80 Installation & Maintenance Manual

•
When you have completed all changes, press the
screen. You will see the prompt: "Exit This Feature"; press "Y" for yes.
•
You will then be prompted to "Save Current Setting?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" to save changes.
•
If you press "Y" (yes), you will then be prompted "File Exists, Override?"
•
Press "N" to abort changes and leave all data unchanged.
•
Press "Y" (yes) to continue with the save operation.
°
•
Press (escape) again to return to the Database Programming menu.
•
Continue making other programming changes or exit PC-DBA programming.
Note: Changes made via PC-DBA are not updated to the DX-80 system memory until a "SEND" function
has been performed. Please refer to the Programming section of this manual to learn more about this
procedure.
CO Line Ringing Modes
The DX-80 system has several ringing modes to allow flexible ringing patterns depending office conditions. The
ringing modes available are: DAY, EVEning, ALTernate, and TIME. The DAY and EVE modes can be programmed
for ringing assignments as required in these two operational conditions. Details for each mode are listed below.
DAY: This is the ringing pattern for CO Line ringing assignments while the system is in DAY mode.
EVE: This is the ringing pattern for CO Line ringing assignments while the system is in EVE (evening) mode.
TIME: This is a scheduled time clock that automatically adjusts the mode of system operation from DAY mode to
EVE mode based upon preprogrammed settings.
ALT: The Alternate mode is specific to use with the optional AAM (Automated Attendant Module). This mode re-
directs callers who have dialed 0 (zero) at the auto-attendant prompt to a temporary (alternate) destination.
This is typically used for primary attendant break periods, etc.
Related Features
Class of Service – Extension
Class of Service – System
Automatic CO Line Ringing Modes
Related Programming
CO Line – Answering Position – Day, Eve assignments.
System Application – Time Switching
Operation – at the Attendant Extension
1. While the attendant extension is idle, press the Ringing Mode feature access code
prompts for the Extension password.
2. Input the password (default 9999). The mode of operation is then advanced sequentially.
3. Repeat the process to continue the advance of modes.
Operation – at Any Digital Extension Using the Attendant Password
1. While the extension is idle, press the Attendant Administration code
the Tenant Group to enter.
2. Input the Tenant Group (typically "1") and then press [
Extension password.
P7290 IMM
DX-80 I M
NSTALLATION AND AINTENANCE
°
(escape) key to exit this database programming
save
3-83
M
ANUAL
!63
Night Service Activate (F63)
Tenant Groups
!63
!/0
. The system prompts for
]. The system then prompts for the Attendant
. The system