Standby Display; Communication Display - Lanier 3730 Operating Instructions Manual

Standby Display

While the machine is in standby dis-
play (immediately after it is turned on
or after the {Cancel} key is pressed),
the following display is shown.
Note
❒ To return the machine to standby
display, do one of the following:
• If you have set the original and
have not pressed the {Start} key,
remove the original.
• If you have not set an original,
press the {Cancel} key.
• If you are in User Tools mode,
press the {User Tools} key or the
{Cancel} key.

Communication Display

While the machine is communicating,
the status is displayed.
❖ Display during Memory Transmission
or Reception:
The destination's name or fax
number appears on the top of the
LCD display.
Note
❒ Even when the machine is send-
ing or receiving a fax message
from/into memory, you can
still scan the next original into
memory.
❖ Immediate Transmission:
Reading the Display
21
1