Message Display - Lanier 5222 Operator's Manual

Message Display

The Message Display shows operational status, error messages, and function menus.
1
2
Basic Key Operations
The following table shows basic key operations.
[Enter #] key
[Escape] key
[Up and Down
Arrow] keys
[Cancel] key
[Exit] key
Introduction
•
Do not apply a strong shock or a force of about 30N (about 3kgf) or more to the panel
display. Otherwise, the display might be damaged.
1
2
Operation and Error Messages are displayed.
Cursor keys.
Items can be selected or specified. These keys correspond to the keys that are in the bottom line of the display.
•
The selected item is highlighted on the panel display.
Press this key to set the function or numeric value, and the
previous display appears.
Press this key to cancel the function or numeric value, and the
previous display appears.
If all functions cannot be displayed, press these keys to switch to
the previous or next page.
Increase or decrease the counter on the display panel.
Press this key to cancel the function, and previous display appears.
Press this key to set the function or numeric value, and normal
display screen appears.
Ready Q'ty: 1
Auto 11x17 8 1/2x14 8 1/2 x 11
Select with < >
100%
Operation Panel
1 - 9