Avaya G250 Maintenance Manual page 62

Avaya Communication Manager controlled maintenance
Table 20: Disabled SAT Commands (2) (continued)
status
interface
isdnpri-testcall
packet-interface
pgate-port
pnc
port-network
switch-node
synchronization
system
Table 21: Additional Disabled SAT Commands (3)
backup clear
disk interface
isdnpri-testcall
pgate-port
Note:
In addition to the commands listed above, the save translations command
Note:
is disabled in the case of an S8300 configured as an LSP. For an LSP,
translations are received from the primary MGC, and there is no need to save
them.
62 Maintenance for the Avaya G250 and Avaya G350 Media Gateways
set reset
packet-interface
pnc
port_network
tone-clock
duplicate
data-module
busyout/
release
ipserver-interface
modem-pool
pnc-standby
tdm
tone-clock
enable/ format
disable
synchronization card-mem
-switch
disk
test
hardware-group (cabinet)
hardware-group (carrier)
hardware-group (pnc)
host-adapter
interface
isdnpri-testcall
led (switch-node)
maintenance
mass-storage
modem-pool
network-control
packet-interface
pkt
synchronization
tdm
tone-clock
2 of 2
monitor recycle
system carrier
(conn)