Status Media-Gateway - Avaya G250 Maintenance Manual

Avaya Communication Manager controlled maintenance
The output from the list configuration media-gateway x command displays a fixed
number of assigned ports for the following media module types: analog(8), DCP(8), BRI(8),
DS1(32), MM314 ETH 24P (None), MM312 DCP (24), MM722 BRI (4), MM720 BRI (16), and
ICC (None).
Note:
Those with "None" as the number of assigned ports display blanks.
Note:
Each of the assigned Media Gateway ports are labeled as 'u' for unassigned, 't' for TTI, 'p' for
PSA or a value between 01 and the max number of assigned ports for each media module type
when that port is assigned.
Module Number displays in the format of GGGVM, where GGG is the media gateway number
and VM is the module number.
Module Types display as 'ANA MM', 'ANN MM', 'BRI MM', 'DCP MM', 'DS1 WAN MM', 'ICC
MM', 'ANA IMM'.
If the wrong type of media module is inserted in a slot, the screen displays the message
Unknown WAN for that slot.
Module Vintage is displayed for both the hardware and firmware.

status media-gateway

The status media-gateway command displays the alarm status for the administered media
gateways. This command lists alarms, lists busied out trunks and stations, and lists how many
H.248 links are up and down for all media gateways. The alarms displayed here are only
associated with board type alarms on the media modules. Status for VoIP and Media Gateway
alarms are provided via the Media Gateway Processor CLI.
Figure 7: Status Media-Gateways Screen
status media-gateway
ALARM SUMMARY
Major:
Minor:
Warning:
Alarms
MG Mj Mn Wn Lk
1 1| 0| 0|dn
2 1| 0| 0|dn
3 1| 0| 0|pd
56 Maintenance for the Avaya G250 and Avaya G350 Media Gateways
BUSY-OUT SUMMARY
3 Trunks: 0
0 Stations: 0
0
GATEWAY STATUS
Alarms
MG Mj Mn Wn Lk MG Mj Mn Wn Lk
H.248 LINK SUMMARY
Links Down: 3
Links UP: 0
Alarms Alarms
MG Mj Mn Wn Lk
Page 1 of x
# Logins: 1
Alarms
MG Mj Mn Wn Lk